Hangzhou Nanfang Environment Purification Equipment Co., Ltd.
Main products:Dust Collector,Fan
Products
Contact Us
  • Contact Person : Ms. Yang WenJuan
  • Company Name : Hangzhou Nanfang Environment Purification Equipment Co., Ltd.
  • Tel : 86-0571-88791999
  • Fax : 86-0571-88791833
  • Address : Zhejiang,Hangzhou,Ducheng Village, Liangzhu Town,Yuhang Dist.
  • Country/Region : China
  • Zip : 311113

CLT/A cyclone dust collector

CLT/A cyclone dust collector
Product Detailed
1.Low cost,noise,resistance 2.Easy maintenance and installment 3.ISO9001:2000.ISO14001:2004,OHSMS 4.Good enviromental effect

Features:

 1.Large air volume, free combination

 2.low in cost, long service life

 3.good separation effect for coarse dust particles

 4.preliminary treatment for multi-stage dust removing

 Application scope:

    It’s especially applicable to high temperature and high density dust industries, widely used in metallurgy, casting, sand blasting, building materials, power industry and fire proof materials.

Operating principle:

   CLT/A type spiral cyclone dust remover is the basic type of cyclone dust remover, and also of spiral type. Its cover plate is in spiral tangent shape with a down-tilting angle of 15°. Dust air backspin along the tilting cover plate instead of forming up ash loop, which can remove small swirling air stream formed by upward flow of the incoming air stream, reduce energy consumption and improve dust removing efficiency.  It is applicable to dust removing of high density, dry and non-fibrous dust particles.

   CLT/A type cyclone dust remover is composed of cyclone cylinder, dust collecting hopper and spiral case ( or wind collecting cap) . It is divided into single cylinder, double-cylinder, three-cylinder, four-cylinder and six-cylinder based on the number of cylinders. Each type sends out air in two ways: X type (sending out air horizontally) is used in negative pressure operation; Y type (sending out air from above) is used in positive and negative pressure operations.

 

Technical Parameters Table for CLT/A cyclone dust collector

Parameters CLT/A-3CLT/A-4CLT/A-5CLT/A-5.5CLT/A-6CLT/A-6.5CLT/A-7CLT/A-8

Nominal Airflow

  (cfm)

394~719694~12781094~19971317~24171570~28751840~33762134~39142793~5110

Resistance

  (mmH20)

84~28584~28584~28584~28584~28584~28584~28584~285
H (in)5519/64735/649028/329949/6410821/3211735/641267/161447/32
ΦD (in)1145/641519/32191/22129/642313/322511/32275/163113/64

Approx. Shipping

 Weight  (ibs.)

25305060101201958029700391605060074800

 

NOTE:

    This table is monocular filter parameters, according to air volume conditions, you can choose binoculars, four cylinder, six-cylinder combination. Picture shows the 4 cylinder precipitator

CLT/A cyclone dust collector



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.